This glossary is a quick reference for electrical and solar terminology in use on this wiki.
- Filter → All terms • Acronyms • Electrical • Vehicles
Showing 29 electrical/solar terms:
- The voltage the battery bank is held at until the Absorption stage is completed. Abbreviated Vabs.
- An instrument used to measure the current in a circuit.
- Battery Management System
- The current obtained when solar panels are producing their maximum power, abbreviated Imp.
- How low a deep-cycle battery is taken between full charges.
- The Fill Factor, a measure of the efficiency of a solar panel.
- The efficiency of a solar panel cell: a ratio of its Maximum Power Point to the product of the Short Circuit Current and the Open Circuit Voltage.
- The Intensity at Maximum Power, which is current obtained when solar panels are producing their maximum power.
- Electrical current, expressed in Amps, and abbreviated as "I" in Isc and Imp.
- Intensity of Short Circuit, or the Short Circuit Current in an electrical system.
- An abbreviation for "LiFePO4", or lithium iron phosphate, a popular battery chemistry.
- LiFePO4 is the chemical symbol for lithium iron phosphate, a popular battery chemistry.
- Maximum Power Point Tracking, a method used by solar charge controllers to increase the solar harvest from solar panels.
- Modified Sine Wave, which refers to a type of AC (alternating current) power output from an inverter.
- The maximum amount of power a solar panel can deliver during its standard test condition.
- A technique used with solar panels to maximize energy extraction as solar light changes throughout the day.
- Pure Sine Wave, which refers to a type of AC (alternating current) power output from an inverter.
- Pulse Width Modulation, which refers to a type of Solar Charge Controller.
- Maximum Power Point of a solar panel.
- Maximum Power Point of a solar panel.
- A configured number stored in a device which guides the device's behavior, such as charging voltages in a solar charge controller.
- An electrical connection to the conventional power grid. This term is borrowed from marine use, referring to a docked boat connected to power.
- The value of the current when the positive and negative terminals of a solar panel are connected to each other through an ammeter in series.
- The absorption voltage, which is the voltage the battery bank is held at until the absorption stage is completed.
- Voltage at Maximum Power, the highest voltage a solar panel can supply under standard test conditions.
- Voltage at Open Circuit of a solar panel without connected loads.
- The unit of electrical potential, electric potential difference (voltage), and electromotive force. Abbreviated "V".
- The voltage available when a solar panel is connected to a load and is operating at its maximum capacity under standard test conditions. Abbreviated as Vmp.
- The voltage as checked with a voltmeter across the output terminals of the solar panel module, without connecting any load. Abbreviated as Voc.